Protect your Polaris RZR 900 / 1000 S / 4 900 S/ S 4 1000 2015-2021 with this Made in the USA Factory UTV Skid Plate.
This Skid Plate is constructed from UHMW (Ultra-High Molecular Weight) plastic which is significantly lighter than aluminum. UHMW is an extremely durable polymer that is used in many applications where abrasion resistance (the ability to slide over a rock) and impact resistance is critical. This provides the underside of your Polaris RZR4 900 excellent protection from boulders, stumps and other objects that can cause expensive damage to the frame, engine, and differentials.
The UHMW provides a smooth and slick surface which helps your Polaris RZR4 900 glide over obstacles easier than Aluminum Skid Plates. The smooth surface of the UHMW layer greatly reduces the chances of getting 'Hung Up" on obstacles and is much Quieter than Aluminum.
Unlike the stock setup and some other aftermarket Skid Plates, all the Factory UTV hardware is recessed, which reduces the likelihood of a bolt being damaged or getting hung up on a rock.
The bottom line is that OEM Skid Plates just do not cut it out on the trail. OEM Skid Plates will fail sooner or later and when they do it is usually involves a costly repair. You have a lot invested in your Polaris RZR4 900 so protect that investment with a set of durable and long lasting Factory UTV UHMW Skid Plates. Factory UTV Skid Plates are custom made right here in the USA. Invest in Skid Plates instead of paying expensive repair bills and keep your Polaris RZR4 900 out on the trail and out of the repair shop.
Width Reference:
-( 2021 -2022 ) RZR Trail / RZR 900 Trail ( 50″ wide )
-( 2021 -2022 ) RZR 900 “S” Trail, 1000 “S” Trail ( 60″ wide )
-( 2017 -2020 ) RZR 900, EPS, XC, 900 Trail Premium, 900 “FOX” Edition ( 50″ wide )
-( 2017 -2020 ) RZR 900 “S”, 900 “S” EPS, 4x 900 EPS, 4x 900 “S”, 900 “S” Trail Premium, 1000 “S”, 1000 “S” Trail, 4x 1000 “S” – ( 60″ wide )
-( 2015 – 2016 ) RZR 900 EPS, 900 “FOX” Edition, Early 900 Trail ( 50″ wide )
-( 2015 – 2016 ) RZR 900, XC, 900 “S”, EPS, 1000 “S” – ( 60″ wide )
-( 2014 ) – See XP 900 page ( 2014 same as XP 900 )
* Does Not Fit the RZR XP 900 or RZR XP 1000 )*
* If ( 2014 ) 900 – 900 EPS models – See XP 900: A-Arm Guards and Trailing arm Guards
Free Shipping in the Lower 48 States
Proudly Made in the USA
**Please retain all your OEM skid plate hardware for new skid install. We will supply all extra hardware required to mount new skids**